position pulse
英 [pəˈzɪʃn pʌls]
美 [pəˈzɪʃn pʌls]
定位脉冲
双语例句
- Balance of the balance disk is dynamic, the pump rotor in a balanced position for the axial pulse before and after.
平衡盘的平衡状态是动态的，泵的转子在某一平衡位置会前后作轴向脉动。 - Point change in working conditions, the rotor will be automatically moved to a new equilibrium position for the axial pulse.
工况点改变时，转子会自动移到新的平衡位置作轴向脉动。 - The cooperative object for laser system is a plane mirror placed at a remote position. The light pulse of light source transmitting and signal sampling are controlled by a microcomputer system.
激光系统的合作目标为远处一平面镜，光源发射光脉冲和信号采集由微机系统控制。 - The result shows that optical fiber nonlinear damping effect on the amplitude, pulse width, chirp, frequency and phase, but don't on the position of the bright-soliton-like pulse in convenient monomode optical fibers.
对于常规单模光纤，光纤非线性阻尼将对类明孤子脉冲的振幅、脉宽、啁啾、频率和相位参数有影响，而对位置参数ξ无影响。 - Realize the Exact Position Control of Axle Using PLC Pulse Output and High Speed Count Function
利用PLC脉冲输出和高速计数功能实现轴的精确定位控制 - Based on the method of reverberation matrix, the velocity wave of a damaged frame structure at the position of square pulse application is discussed in this paper. The local damage is described by reducing the cross-sectional area of damaged elements.
基于回传射线矩阵法，研究了有损伤框架结构在水平方波脉冲作用下脉冲作用点的速度波，结构的局部损伤用减小受损单元的横截面面积来模拟。 - A pneumatic position servo system with pulse code modulation ( PCM) is described in this paper.
本文研究脉冲编码调制（PCM）控制方式的气压位置伺服系统。 - The Position of Equivalent Width of Chirped Pulse
啁啾脉冲等值宽度的位置 - In this paper, a new Chaotic Pulse Position and Phase Coded Pulse Compression Radar ( CPPPC PCR) signal is studied.
本文研究了一种新型混沌编码的脉冲位置和相位复合调制的脉冲压缩雷达信号。 - Application of All Position Pulse TIG Automatic Welding on High Pressure Air Cooler with Deep Holes
深孔加丝式全位置脉冲自动钨极氩弧焊在高压空冷器上的应用 - The experiments show that the rotating arc sensor have good characteristics of anti interference, the rotation velocity is stable, the position detection pulse is reliable, and the sampled welding current is good linear.
实验证明所设计的电路抗干扰能力强，旋转速度稳定，测位脉冲可靠，焊接电流的采集线性度好。 - Then a correction and compensation device is introduced, which is based on the use of monolithic computer. This device can be used to adjust the zero position pulse dynamically.
该系统可实时地对零位脉冲信号进行动态校正，利用校正后的零位脉冲信号进行控制可较好地解决原有螺旋线基础上的螺纹数控加工。 - Position servo system which has high accuracy and possessed speed tracing performance is one kind of control system that has been widely applied with high accuracy position control, its driving signal is pulse which presents position.
以快速、高精度跟踪为主要目标的位置伺服系统是广泛应用于高精度位置控制的主要控制方式之一，其驱动信号为代表位置命令的脉冲信号。 - The paper mainly analyzes three control methods: Current Chopping Control, Angular Position Control and Pulse Width Modulation control based on switched reluctance motor linear model.
基于开关磁阻电机的线性模型对其电流斩波控制（CCC）、角度位置控制（APC）和脉冲宽度调制控制（PWM）3种控制方式做了仿真分析。 - This paper presents the concept and the basic principles of UWB, including UWB signal features both in time and frequency domains, then analyzes general two approaches of modulation& pulse position modulation ( PPM) and pulse amplitude modulation ( PAM).
介绍了UWB的概念和工作原理、UWB信号的时域特征和频域特征，分析了UWB常用的两种调制技术：脉冲幅度调制（PAM）和脉冲位置调制（PPM）的详细过程。 - Research on Modeling and Simulation for Hydraulic Position System with Generalized Pulse Code Modulation Control
广义脉码调制液压位置控制系统的建模与仿真研究 - Utilizing revolving conder for transforming the position of elevator into pulse, pc takes high-speedy count of the pulse.
利用旋转编码器将电梯的位移转化为脉冲数，PLC对此脉冲进行高速计数。 - The PFM modulation makes the frequency spectrum broadened and the transmitted messages depend on the exact position of the pulse edge. So the quality of the transmission will be advanced and the signal and noise ratio will be improved.
采用PFM调制，频谱将会变宽，传输的信息依赖于脉冲沿的准确位置，并以此可以换取传输质量的提高和信噪比的改善。 - The paper focuses on the effect of axially relative position of coil and work on pulse force distribution, though there are some other factors.
影响磁脉冲力的因素很多，但是本文主要研究线圈与工件的轴向相对位置对磁脉冲力分布的影响； - The NC processing of screw thread cut along a spiral already available on the workpiece is investigated, and a method for controlling screw thread processing with adjustable zero position pulse is proposed.
研究了按原有螺旋线进行的螺纹数控加工，针对此类加工提出了一种利用校正的零位脉冲信号来控制螺纹加工的方法，并给出了一个基于8031单片机的校正系统。 - The reason that the bubble effect enlarged is that bubble energy is concentrated in the low position. And the energy of main pulse distributes uniformly throughout the band.
研究发现气泡效应之所以会随着传播时间和距离的增大而放大是由于气泡能量主要集中在低频位置，而主脉冲能量在整个频带内的能量分布比较均匀。 - Control group received conventional acupuncture therapy; treatment group according to three factors ( needle position, pulse wave, acupuncture method) two level orthogonal design is divided into four groups treated with acupuncture.
对照组给予常规针刺治疗；治疗组按照三因素（针刺位置，脉冲波型，针刺方式）两水平的正交设计试验分为4组进行针灸治疗。 - On the base of studies of these three coding methods, a pulse position coding based on stepped-frequency interrogation-pulse-stepped-frequency pulse position coding-was presented and studied.
在对这三种编码方式研究的基础上，本论文提出了一种基于频率步进查询脉冲的脉冲位置编码&频率步进脉冲位置编码。 - A new Walsh Matched-Threshold Filtering based anti-collision is proposed. Fifthly, the peak and position of reflected pulse are two main parameters of tag decoding.
在此基础上，采用基于Walsh域的匹配门限滤波方法来对多目标进行辨识。并采用滤波门限的方法保证了运算速度。第五，反射脉冲的峰值和位置是标签解码的两个主要参数。 - In the observation indexes, tongue pictures included tongue color, tongue body, quality of tongue coating and color of tongue coating; pulse conditions included pulse position, pulse rate, pulse width, pulse length, pulse fluency, pulse tensity and pulse evenness.
所观察指标，舌象包括：舌色、舌体、苔质、苔色；脉象包括：脉位、脉率、脉宽、脉长、脉力、流利度、紧张度、均匀度。 - There are two key problems of permanent magnet linear synchronous motor control, rotor position detection and space vector pulse width modulation problems, which are put forward non-sensor position detection method based on rotor flux and pulse width modulation method of improved current space vector.
然后针对永磁直线同步电机控制中的两个关键问题&转子位置检测和空间矢量脉宽调制问题，提出了基于转子磁链的无传感器位置检测方法和改进的空间矢量脉宽调制方法。 - We analyzed the LED modulation and coding, the pulse position modulation ( PPM) and the multiple pulse position modulation ( MPPM) were compared in their reliability and validity.
分析了LED调制编码，并将单脉冲位置调制与多脉冲位置调制的可靠性和有效性进行了对比。 - In OTDM system, the collision, which always alters amplitude and position of the pulse, mainly happens between adjacent solitons.
OTDM中的孤子互作用主要表现在相邻孤子发生碰撞，脉冲位置和幅度发生了改变。 - The principles and methods of the current acquisition module, the speed and position detection module and SVPWM pulse generation module are told by the author.
作者给出了电流采集模块、转子位置速度检测模块和SVPWM脉冲发生模块的实现原理、方法。